Black Flag Fly Paper How To Use

Download Commodity

Download Article

Flies and other flying insects are a real nuisance when they keep buzzing around your dwelling house. Fortunately, you lot can command them with Raid fly ribbons. These are hanging traps with sticky paper that grab annoying flies. They're very easy to utilise. Simply pick an ideal location for the trap, pull the ribbon out of its tube, and hang it on the wall. Then, wait for the trap to start catching flies.

1
Go to a spot where flies gather and the tube can hang freely. It's best to place the ribbon in a spot where the ribbon can hang freely, not against a wall. That way, yous can catch flies from all directions. Door openings, awnings, sheds, and tree branches are all viable locations.^[i]
- Also find a surface that a thumbtack can penetrate, similar wood or drywall. If y'all have to adhere it to a harder surface, use duct tape instead.
- Remember to place the ribbon somewhere people won't knock into information technology.
2
Remove the thumbtack from the top of the tube. By the ruddy ribbon on the elevation of the tube, look for a flat, silver thumbtack. Pull information technology out and put it aside for later.^[2]
- You'll need the thumbtack to hang the ribbon, so put it in a safe place.
- If you lose the thumbtack, yous can too employ a regular i in its place. Notwithstanding, effort to find the original i or y'all run a risk stepping on information technology.
Advertisement
iii
Agree the tube in one hand on the opposite side from the cherry strap. This is the bottom portion that doesn't come out. Concord information technology firmly with one hand.
- Don't hold the tube too tightly. It'south only cardboard, and also much pressure level volition shell it.
4
Grab the tube by the red strap and pull the ribbon out. The red strap attaches to the ribbon. Betoken the strap down and pull until the ribbon starts coming out. Keep pulling until the ribbon is fully extended.^[3]
- If the ribbon doesn't come up out well, try pulling with a circular motion to help work it out.
- The ribbon is about three feet (0.91 m) long, so you might have to readjust your grip to pull information technology all out.
If the ribbon doesn't unroll well, it may exist cold. Hold it between your hands for a minute to warm it up and make the ribbon come out easier. You tin coil the tube effectually a bit, simply don't printing it hard or you might beat information technology.

1

Hold the red loop upwardly against the surface of where you are hanging the trap. When you find a spot for the ribbon, hold it up confronting an zipper point. You lot'll need a surface that the thumbtack can penetrate, similar wood or drywall. Make certain the red loop presses against the surface.^[4]
2
Button the thumbtack through the blood-red loop into what you are hanging the trap from. Accept the thumb tack you removed before. Push information technology through the red loop and into the hanging surface. Go along pressing until the tack is apartment against the surface.^[5]
- If you're trying to hang the ribbon on a harder surface like brick or metallic, you can also use duct tape to adhere it instead of the pollex tack.
3
Movement the ribbon to another location if you don't catch flies in 2-3 days. Flies sometimes stay away from sure areas because of light or wet. If you haven't caught whatever flies for a few days, remove the ribbon and move it to some other location. See if you have better luck in that location.
- If the ribbon gets covered in insects or loses its stickiness, supervene upon it with a new one.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Fly ribbons piece of work for other fly insects too, like mosquitoes. Hang them if you have bug with them as well.^[half-dozen]
If you go any of the agglutinative from the ribbon on your easily, it comes off hands with soap and h2o.
Wrap the ribbon in cloth or newspapers when yous dispose of it and then it doesn't stick to other garbage.